All kinds/Brands of Modem including Starlink
Starlink Gen is best For Residential Users And Everyday Internet Applications Like Streaming, Video Calls, Online Gaming & More. The Starlink Box Contains Everything You Need To Install In Minutes. Starlink Installation Spec Antenna: Electronic Phased Array Field of View: 110 ° Orientation: Software Assisted Manual Orienting Weight: 2.9 kg (6.4 lb), 3.2 kg (7 lb) with Kickstand Environmental Rating: IP67 Type 4 Operating Temperature: -30°C to 50°C (-22°F to 122°F) Wind Speed Operational: 96 kph+ (60 mph+) Snow Melt Capability: Up to 40 mm / hour (1.5 in / hour) Power Consumption Average: 75 - 100 W Starlink Wifi Router Product Dimensions: 43.4 x 298.6 x 120.4 mm (1.7 in x 11.76 in x 4.74 in) Wi-Fi Technology: 802.11 a/b/g/n/ac/ax Generation: Wi-Fi 6 Radio: Tri Band 4 x 4 MU-MIMO Ethernet Ports: Two (2) Latching Ethernet LAN ports with removable cover Coverage: Up to 297 m² (3,200 ft²) Operating Temperature: -30°C to 50°C (-22°F to 122°F) Weight: 0.57 kg (1.25 lbs) Security: WPA2 Environmental Rating: IP56 Rated (Water Resistant), configured for indoor use Power Indicator LED | face plate, lower left corner of router Mesh Compatibility: Compatible with Starlink Gen 2 and Gen 3 Mesh nodes, up to 3 Starlink Mesh Nodes. *Not compatible with 3rd party mesh systems Devices Connect: up to 235 devices Starlink Power Supply Product Dimensions: 173 x 93 x 35.75 mm (6.8 in x 3.66 in x 1.4 in) Weight: 0.65 kg (1.43 lbs) Environmental Rating: IP66 Type 4 Operating Temperature: -30°C to 60°C (-22°F to 140°F) Power Specifications: 100-240V ~ 2.5A 50 - 60 Hz
Starlink Mini is a compact, portable kit, designed to provide high-speed, low-latency internet on the go or in your home. Applications: Starlink Mini is a compact, portable kit, designed to provide high-speed, low-latency internet on the go or in your home. What's in the box: Starlink with Integrated WiFi Kickstand Mini Pipe Adapter and Flat Mount DC Power Cable - 15 m (49.2 ft) Power Supply Starlink Plug Starlink ODU Package Weight: 2.89 kg (6.37 lbs) Package Dimensions: 430 x 334 x 79 mm (16.92 x 13.14 x 3.11 in) Antenna: Electronic Phased Array Field of View: 110 ° Orientation: Software Assisted Manual Orienting Weight: 1.10 kg (2.43 lb) 1.16 kg (2.56 lb) with Kickstand 1.53 kg (3.37 lb) with Kickstand & 15 m Cable Environmental Rating: IP67 Type 4 with DC Power Cable and Starlink Plug/Cable installed Operating Temperature: -30°C to 50°C (-22°F to 122°F) Wind Speed Operational: 96 kph+ (60 mph+) Snow Melt Capability Up to 25mm / hour (1 in / hour) Power Consumption Average: 25-40W Input Rating: 12-48V 60W (12v short Starlink cable coming soon in Shop) USB PD Requirement 100W, 20V/5A Minimum (with Starlink USB-C to Barrel Jack Cable Accessory) Wi-Fi Technology: 802.11a/b/g/n/ac Generation: WiFi 5 Radio Dual Band: 3 x 3 MU-MIMO Ethernet Ports One (1) Latching Ethernet LAN port with Starlink Plug Coverage Up to 112 m² (1,200 ft²) Security: WPA2 Power Indicator LED | rear face plate, lower left corner Mesh Compatibility: Compatible with all Starlink mesh systems *Not compatible with 3rd party mesh systems Devices Connect: up to 128 devices Starlink Power Supply Product Dimensions: 91 x 44 x 51 mm (3.6 in x 1.7 in x 2.0 in) Weight: 0.2 kg (0.44 lbs) Environmental Rating: IP66 Type 4 Operating Temperature: -30°C to 50°C (-22°F to 122°F) Power Specifications: 100-240V ~ 1.6A 50 - 60 Hz
AC1200 Wireless MU-MIMO VDSL/ADSL Modem Router Speedy WiFi – Experience superb wireless connections with 867 Mbps (5 GHz) + 300 Mbps (2.4 GHz) dual band WiFi Superior Range – Two fixed omnidirectional antennas with Beamforming technology provide stable wireless connections and optimal coverage Versatile Connectivity – Fully compatible with VDSL2/ADSL2+/ADSL2/ADSL standards, as well as fiber, cable, and 3G/4G internet services Whole-Home Coverage with OneMesh – Works alongside TP-Link OneMesh products to create a flexible Mesh network MU-MIMO Technology – Simultaneously transfers data to multiple devices, reducing wait times Full Gigabit Ports – Take full advantage of broadband speeds up to 1 Gbps Tether App– TP-Link Tether provides the easiest way to access and manage your router on your iOS and Android devices
This product is DC Converter USB Cable, designed to transform the 5V DC output of your standard power bank into either 12V DC, perfectly suited to power your Fibre Optics or 4G Internet Router. No more interruptions during electricity outages; now you can seamlessly power your Internet Router using your trusty power bank. Compatible with most Fibre and 4G Internet Routers from leading brands like FibreOne, IPNX, Glo, Airtel, Swift Networks, Mtnng, Spectranet, Smile Networks, and more, this innovative cable allows you to circumvent the need for an AC Charger. Unlike typical converters, our model stands out for its durability, stability, and heat-resistant design. Packing reliability and affordability into one package, our USB Cable is an economical alternative to dedicated router power banks. Whether you're using your existing power bank or considering a new purchase, this cable offers the flexibility you need to stay connected without compromise Key Features The cable doesn't work with most Oraimo power bank, we recommend you use it with Itel, Ace Elec, Romoss power bank and others. It doesn't work with ZTE Router Model MC888D This USB Cable Powers 12V DC 4G Routers with any normal Powerbank Converts 5V output from Powerbank to 12V input for 4G Router Works with routers of FibreOne, IPNX, Glo, Airtel, MTNng, Swift Networks, Spectranet, Smile Networks, etc Stable current supply Does not heat up Durable Very Affordable compared to router Power banks in the market
The Tenda O3 5KM Outdoor Point-to-Point CPE is a powerful wireless solution designed for long-distance internet transmission. With a built-in 12dBi directional antenna, it delivers stable and high-speed connectivity over distances of up to 5 kilometers. Perfect for outdoor use, this device is ideal for connecting buildings, extending WiFi coverage, and setting up CCTV networks. It supports multiple operating modes including Access Point, Station, and WISP, making it flexible for different networking needs. Built for durability, the Tenda O3 performs reliably in outdoor environments while maintaining strong signal strength and consistent performance.
Up to 300Mbps on 5GHz wireless data rates*1 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector, ideal for long-distance wireless transmission up to 30km*2 Excellent Up to 300Mbps on 5GHz wireless data rates 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector, ideal for long-distance wireless transmission up to 30km Excellent beam directivity, improved latency and noise cancellation Innovative snap-lock parts make for fast assembly and a sturdy structural design keeps CPE610 stable even in strong winds Durable IP65 weatherproof enclosure along with 15 kV ESD and 6 kV lightning protection ensures all-weather suitability TP-Link Pharos MAXtream TDMA technology improves throughput, capacity and latency performance Pharos Control gives administrators a free, centralized management system Passive PoE supports to allow flexible deployment and convenient installation
Excellent Hardware Designs Detachable Antennas Wi-Fi That Goes the Distance Specially Designed Weatherproof Enclosure for Outdoor Environment Efficient Centralized Network Management TP-Link Omada allows hotels to build reliable WiFi networks. Hotel WiFi network solutions including network topology, design, features, installation, and products are introduced. Built for outdoor Wi-Fi applications Up to 300Mbps Wi-Fi with 2x2 MIMO technology High transmission power and high gain antennas provide a long-range coverage area Durable, weatherproof enclosure to withstand fair and foul weather Passive PoE(Power over Ethernet) support and simple mounting design allow for flexible deployment and convenient installation Free Auranet Controller Software lets administrators easily manage hundreds of EAPs Captive portal provides a convenient method for guest authentication Package Contents: 300Mbps Wireless N Outdoor Access Point Passive PoE Adapter Power Cord Mounting Kits Waterproof Rubber Insert Waterproof Antennas Installation Guide Product Type: Wireless Access Point Product Type: Wireless Access Point Manufacturer Part Number: EAP110-Outdoor Form Factor: Wall Mountable Form Factor: Pole-mountable Product Model: EAP110-Outdoor Form Factor: Wall Mountable Form Factor: Pole-mountable Manufacturer: TP-LINK Technologies Co., Ltd Product Model: EAP110-Outdoor Product Name: 300Mbps Wireless N Outdoor Access Point Wireless Transmission Speed: 300 Mbit/s Brand Name: TP-LINK Wireless Transmission Speed: 300 Mbit/s Brand Name: TP-LINK Height: 1.7 Width: 8.2 Depth: 3.7 Frequency Band: 2.40 GHz Wireless LAN Standard: IEEE 802.11n Ethernet Technology: Fast Ethernet USB: No HDMI: No VGA: No Number of Network (RJ-45) Ports: 1 Powerline: No Management Port: No PoE (RJ-45) Port: No Number of External Antennas: 2 MIMO Technology: Yes PoE PD Port: Yes Frequency Band: 2.40 GHz Environmentally Friendly: Yes Environmental Certification: RoHS Wireless LAN Standard: IEEE 802.11n Ethernet Technology: Fast Ethernet USB: No HDMI: No VGA: No Number of Network (RJ-45) Ports: 1 Powerline: No Management Port: No PoE (RJ-45) Port: No Number of External Antennas: 2 MIMO Technology: Yes PoE PD Port: Yes
POWER BEAM M5-400 GIGABYTE ETHERNET PORT (10/100/ 1 DISH STEEL PAN LONG RANGE DISTANCE The Special Features The PBE-M5-400 PowerBeam airMAX Bridge from Ubiquiti Networks is an airMAX product meant to function as customer premises equipment (CPE). With a more concentrated, direct signal clients benefit from improved noise immunity to as this bridge is capable of filtering out much of the noise that can degrade the signal. With Ubiquiti's own inner feed design mounting of the PowerBeam airMAX Bridge has been greatly simplified as there is no longer a need for any cabling. Once installed the included airMAX technology helps network administrators to manage and monitor the network. From intelligent QoS to scalability Ubiquiti has provided the tools necessary to create long range networks offering reliable wireless network access to a large number of clients. Noise Immunity The PowerBeam directs RF energy in a tight beamwidth. With the focus in one direction, the PowerBeam blocks or spatially filters out noise, to improve noise immunity. This feature works in areas crowded with other RF signals of the same or similar frequency. Integrated Design Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam is versatile and cost-effective to deploy. The antenna feed has a thin gray ring around the center of the cap. airMAX Technology Included Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency. It provides significant performance improvements in latency, throughput, and scalability compared to all other outdoor systems in its class. With intelligent QoS, priority is given to voice/video for seamless streaming and is capable of high-speed, carrier-class links. AirOS airOS is a highly developed, user-friendly Ubiquiti firmware technology. The firmware architecture enables high-performance and outdoor multi-point networking. It features protocol support, Ubiquiti channelization, spectral width adjustment, ACK auto-timing, AAP technology, and multi-language support. AirView Integrated on all Ubiquiti M products, airView provides advanced spectrum analyzer functionality. Waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference. With Waterfall you can aggregate energy over time for each frequency, Waveform aggregate energy collected, with real-time energy shown as a function of frequency, and you can also automate airView to record and report results with recording. AirControl airControl is a powerful and intuitive, Web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices. It features network map, monitor device status, mass firmware upgrade, Web UI access, manage groups of devices, and task scheduling. Innovative Mechanical Design With built-in mechanical tilt, the mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt. The number of fasteners is reduced to simplify assembly. Tools are required only when the technician mounts the PowerBeam on the pole. The antenna feed can be detached with the push of a button. Corrosion Resistance Fasteners are GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners. Dish and brackets made of galvanized steel that is powder-coated for corrosion resistance. The redesigned pole bracket resists paint loss for improved corrosion resistance.
Litebeam 5ac Gen 2 2 X 2 mimo The LiteBeam® AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing. Management Wi-Fi Radio The LiteBeam® AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the LiteBeam® AC offers a more robust mount with separate azimuth and elevation adjustments. Now with airOS®8 and airView® airOS®8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
TP-Link Eap225 Ac1350 Simultaneous 450Mbps on 2.4GHz and 867Mbps on 5GHz totals 1317Mbps Wi-Fi speeds Free EAP Controller Software lets administrators easily manage hundreds of EAPs Compatibility with 802.3af and Passive PoE support makes deployment effortless and flexible Captive portal provides a convenient method for guest authentication Band Steering Automatically moves dual band devices onto the wider 5GHz band for faster connections MU-MIMO means access points simultaneously transfer data with multiple devices, speeding up connections Beamforming concentrates signal towards where you need it most, providing a fast and stable Wi-Fi experience Supports management VLAN for an enhanced network management Schedules can be set so access points automatically reboot and Wi-Fi turns on/off at the times you choose EAP225 supports both 802.3af PoE and Passive PoE power supply, can be either powered by a PoE switch or the provided PoE adapter, making deployment effortless and flexible. The Omada business-grade 11ac Wi-Fi solution is engineered to handle heavy multi-user usage in large areas without encountering the same stability issues found with standard routers and access points purposed for home use. It’s the perfect fit for motels, salons, chain-stores, schools, and restaurants. Outfitted with the latest 802.11ac Wave 2 M
Upgrade your internet experience with this high performance dual band wireless WiFi router designed to deliver fast, stable, and reliable connectivity for homes, offices, and smart environments. Featuring 8 high gain external antennas, this router helps extend wireless coverage across multiple rooms while reducing dead zones for smoother browsing, streaming, online learning, gaming, and video calls. The modern design adds a stylish touch to your setup while supporting efficient heat dissipation for long lasting performance. This advanced router supports multiple device connections at the same time, making it ideal for families, offices, students, and entertainment setups. Enjoy faster downloads, smoother HD video streaming, and responsive online gaming with improved wireless stability. The easy setup process allows users to connect quickly and manage their network with convenience. Whether you need strong WiFi coverage for work, entertainment, or smart devices, this router provides dependable speed and enhanced network efficiency for everyday internet use.
MikroTik hEX (RB750Gr3). This is a powerful, compact 5-port Gigabit Ethernet router designed for locations where wireless connectivity is not required or is handled by separate Access Points. Equipped with a powerful Dual Core 880MHz CPU and 256MB RAM. It handles Gigabit speeds with ease. Hardware IPsec Acceleration: Supports hardware encryption (~470 Mbps). Perfect for secure VPN tunnels for remote work or office-to-office links. MicroSD Slot: Includes a slot for a microSD card, perfect for data storage or running "The Dude" network monitoring server. Advanced Bandwidth Control: Easily manage internet speeds for different users, prioritize Zoom/Teams calls, or block specific websites. Rock Solid Stability: Runs on MikroTik RouterOS—known for staying online for years without needing a reboot. USB Port: Supports 4G/5G modems for internet backup (failover)
he MikroTik hEX PoE is the ultimate "all-in-one" solution for small office or home surveillance setups. Unlike standard routers, it features PoE Output on four ports, meaning you can power your VoIP phones, security cameras, or Wi-Fi Access Points directly from the router without needing extra power adapters. It also features an SFP port for fiber connectivity, making it future-proof for high-speed fiber internet providers. Powered by RouterOS, it gives you total control over your network traffic, security, and remote access.
Five Band 5G/4G/3G Amplifier Repeater/Booster: Reliable mobile coverage with this Five Band Amplifier Repeater, designed to 5G, 4G LTE, and 3G signals across multiple frequency bands. It effectively enhances voice calls, mobile data speed, and overall l stability in homes, offices, shops, hotels, and warehouses. Supporting 700MHz, 900MHz, 1800MHz, 2100MHz, and 2600MHz, this powerful network works with most mobile networks, ensuring seamless connectivity even in areas with weak or unstable
This Device support multi-users and devices: Experience the fastest network speed with this device that extends your service range up to 60% farther than other boosters can The 2G+3G+4G Tri-Band booster can support multiple phones and devices, allowing you and all your companions to experience increased signal strength for voice calling and Data internet at the same time with multiple users FAST 3G and 4G DATA SPEED: Reliable cell signal and more consistent data speeds, faster data uploads and downloads. Reduce radiation and increase battery life, up to 2 hours additional talk time in weak-signal areas ALL IN ONE KIT: for voice calling work with all GSM 2G 3G and 4G LTE and VOLTE Network operators like Airtel, Vodafone, Idea Cellular, Reliance Jio, Aircel, BSNL, Tata Docomo, Telenor India, MTNL, Uninor .Coverage Area Upto 1500 Sq.Feet
300Mbps Wireless transmission rate; Low power consumption and low radiation; IEEE802.11 b/g/n Wireless standard; High-quality chip configuration, stable performance; System requirements WLAN access point/client according to IEEE 802.11B/G/N The WLAN client must support the WPA encyption standard WLAN access point and the WLAN client with automatic IP address assignment (DHCP) Forwarding of IPv4-based protocols/Address Resolution Protocol The network name(SSID) of the WLAN access point must be set to "visible" Transmission: 300Mbps Interface: USB2.0 Antena: 2*3dBi Frequency: 2.412-2.472GHz
IMC103GP-SFP Series is a Mini Industrial 3-Port 10/100/1000T 802.3at PoE + 1-Port 100/1000X SFP Gigabit Ethernet Switch with 12~48VDC Input and Voltage Booster. This unmanaged industrial solar power PoE switch is designed to match the critical industrial standards. With reliable and simple operation against vibration and shock, and wide operation temperature range, it could match a variety of harsh environment. The switch complies with CE and FCC standards, and passed the 100% burning test to ensure that it will fulfill the needs of industrial applications ►3 10/100/1000BASET RJ45 auto-MDI/MDI-X ports with IEEE 802.3at PoE+ Injector (Port-1 to Port-3) ►1 SFP Port, 100Base-FX or 1000Base-X dual mode (auto detection) ►12~48VDC wide range power input with power booster function ►Up to 90W PoE budget (48VDC), 90W PoE budget (24VDC), 60W PoE budget (12VDC) ►Supports Full/Half-duplex, Auto-negotiation ►IEEE 802.3az Energy Efficient Ethernet (EEE) ►IP40 Aluminum Case ►Supports DIN-Rail & Wall-mount installation ►Environmentally hardened -40°C to 75°C (-40°F to 167°F) operating temperature